8918K - PROCHARGER PIN SET - For Use with APD HUB 5/8"-18 Thread (Set of 4)
8918K
MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)
$195.00
Introducing the New Moser Engineering Drive Pins designed to be used with PRO CHARGER RaceDrive units.
A RaceDrive uses a total of 8 pins (4 on the Blower and 4 on the Hub Adapter that goes to the engine). This pin is designed to replace the pins in an "APD" Hub Adapter, these pins are a 5/8"-18 Fine Thread.
Our newly designed Pins are made from 4140 Chrome Moly and have a shank size the is 50% larger than the OEM pins. The material and increase in size make these pins significantly stronger than the OEM pins and in addition, the heads are designed to use a "TORX" E16 Socket for easier installation and removal. (Sold Seperately), Part # 89E16TS.
The metal insert sleeves must be removed from the Rubber Coupler to use the Moser Drive Pins.
This item represents a set of 4 pins.
A RaceDrive uses a total of 8 pins (4 on the Blower and 4 on the Hub Adapter that goes to the engine). This pin is designed to replace the pins in an "APD" Hub Adapter, these pins are a 5/8"-18 Fine Thread.
Our newly designed Pins are made from 4140 Chrome Moly and have a shank size the is 50% larger than the OEM pins. The material and increase in size make these pins significantly stronger than the OEM pins and in addition, the heads are designed to use a "TORX" E16 Socket for easier installation and removal. (Sold Seperately), Part # 89E16TS.
The metal insert sleeves must be removed from the Rubber Coupler to use the Moser Drive Pins.
This item represents a set of 4 pins.
