12 Bolt Built to Order Housing & Axle Package

$1,826.00

B12HPX

MADE THE AMERICAN WAY IN THE USA!

Product will ship 2 business days following the completion of online order.

The size and weight of these units requires that they ship LTL Truck Freight!

*ALL MOSER 12-BOLT REAR ENDS ARE "CAR" TYPE REARS! THIS INCLUDES ALL TRUCK APPLICATIONS, AFTERMARKET SUSPENSION COMPONENTS THAT UTILIZE THE REAR COVER OF THE OEM 12-BOLT TRUCK REAR ARE NOT APPLICABLE!

Add To Cart
Housing only shown - Includes axles,bearings, studs and retainers

$1,256.00

9B

THE STRONGER REAR-END REPLACEMENT!

MADE THE AMERICAN WAY IN THE USA!
Find your vehicle. Select your options. We will build it the way you want it in just 2 business days!
*Optional Powder Coating adds 2 - 3 days to the processing time!

*THE UMI COIL-OVER KIT FOR GM A-BODY CARS IS NOT APPLICABLE AND WILL NOT WORK WITH ANY OF OUR LOWER CONTROL ARM CHOICES!

Add To Cart
Housing only shown - Includes axles,bearings, studs and retainers

$1,573.00

9M

MADE THE AMERICAN WAY IN THE USA!

Product will ship 2 business days following the completion of online order.

*THE UMI COIL-OVER KIT FOR GM A-BODY CARS IS NOT APPLICABLE AND WILL NOT WORK WITH ANY OF OUR LOWER CONTROL ARM CHOICES!

Add To Cart
Dana 60 Housing & Axle Package

$1,931.00

D60

MADE THE AMERICAN WAY IN THE USA!

Product will ship 2 business days following the completion of online order.

Add To Cart
M88 8.8" Housing & Axle Package

$2,047.00

88

The Moser M88 Housing & Axle Package made the way you want it.

Order will ship two days after completion of online order!

MADE THE AMERICAN WAY IN THE USA!

The size and weight of these units requires that they ship LTL Truck Freight!

Add To Cart
8 3/4 Mopar Complete Built to Order Stamped Housing & Axle Package Part Number Configurator

$1,627.00

875M

8 3/4 MOPAR Complete Built to Order Fabricated Housing & Axle Package
Mopar fanatics…your wait for the strongest 8 3/4" rear end is finally over. Moser Engineering produces the only fabricated housing made to work with a MOPAR center section – The MO875. Designed specifically for early MOPAR vehicles including; A, B, & E Body cars, The MO875 is made to not only withstand the demands of high horsepower applications, but also finish off the back half of any show car with style. 
Find your vehicle.Select your options.
We will build it the way you want it in just 2 business days!

Add To Cart
8 3/4 Mopar Complete Built to Order Stamped Housing & Axle Package Part Number Configurator

$1,562.00

875S

Moser Engineering manufactures a New 8 3/4" Stamped Housings for all you MOPAR Fans!
Product will ship 2 business days following the completion of online order.
MADE THE AMERICAN WAY IN THE USA!

Add To Cart
Housing only shown - Includes axles,bearings, studs and retainers

$2,876.00

9AC

Moser Engineering offers The ultimate Autocross Housing and Brake option packages for those who want to take their street car to the top level of performance and competition. One of the hottest trends in the street market is the Ultimate Street Car Challenges type events held at many car shows or Goodguys type shows. These competitions can be on a drag strip, an air field, road course or even a very tight obstacle course in a parking lot. These also tend to be some of the most enjoyable and also some of the most abusive events for a car owner. This package is built to handle all of these events without compromise. When it comes to making your street car or street rod perform at the top of its ability then you need the Moser Autocross package. This kit gives you the ability to deliver the power reliably to the ground. It also allows you to get the best performance from your brakes without brake kickback common from a flanged axle when used in extreme and very aggressive handling car packages. This kit is an adaptation of a full on Pro Auto Cross style rear-end and can be fitted to work with stock suspension or most aftermarket setups. This is available as an upgrade option for any of the Moser packages. This would include any of the housing and axle packages, complete rear end assemblies along with the Muscle Pak line of rear ends.

*Frame rail interference is prevelant when using the Emergency Brake Caliper & Cable set up on the GM "A-Body" & "G-Body" type vehicles!

Add To Cart
Housing only shown - Includes axles,bearings, studs and retainers

$1,493.00

P7H9

MADE THE AMERICAN WAY IN THE USA!
Find your vehicle. Select your options. We will build it the way you want it in just 2 business days!

Add To Cart

$6,723.00

M9HP11

The New Solid Axle Package is designed to replace the independent
rear end assembly in the Dodge Challenger. This package is based on
the highly successful Moser M9 Fabricated housing and gives you
everything you need to build serious power without breaking like the
OEM rear. This unit still gives you a rear that can handle street driving
and the reliability to go well beyond the limitations of even the best
independent rear end upgrades. Reliability and tunability for the serious
racers that are building serious power.

Features:
•  M9 Fabricated Moser Housing w/Back Brace
•  Moser Custom Race Axles
•  Moser Subframe Assembly
•  Anti-Roll Assembly
•  Torque Arm
•  Track Locators
•  Lower Control Arms
•  Subframe Connector w/Torque Arm Connector
•  Optional Thru Bolt Aluminum Moser Center Section
•  Optional Shocks/Springs


*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE IS REQUIRED!

Add To Cart
MOSER M9 SHOWN WITH 7290KM BRACKETS

$4,316.00

7H9FDRMFL

The Floater Rear End is becoming a necessity for today's big MPH cars. NHRA mandates that vehicles traveling faster than 6.50 or 210 MPH in the 1/4 mile are required to run a "Floater or Live Axle" Rear End.

This Custom Fabricated Item will ship 3-5 days after order completion, if ordered with the powder coating option product will ship in 5-7 days.

Add To Cart