Moser Super Packages

Designed for the 1979-2004 Mustang Platform

$4,170.00

M9SUPERFOXPKG

THE STRONGER REAR-END REPLACEMENT!

The Moser Engineering Super Fox Package designed for 1979-2004 Mustangs.

The Super Fox package is engineered for Fox-Body owners wanting to run a bigger rear tire and upgrade from the stock rear suspension while also allowing the possibility of installing a mini-tub for the rear wheel openings. It also allows for greatly increased suspension adjustment at the housing. The anti-roll bar allows the racer to pre-load the rear suspension for differing track conditions.

Package will typically ship within in 5-7 Business days of completed order!

*REQUIRES CHASSIS FABRICATION AND WELDING

Add To Cart
Designed for the 1978-88 G-Body Platform

$4,170.00

M9SUPERGPKG

Introducing the Moser Engineering Super "G" Package for 1978-1988 GM G-Body Cars

The Super G package is designed for G-Body owners wanting to run a bigger rear tire and upgrade from the stock rear suspension while also allowing the possibility of installing a mini-tub for the rear wheel openings. It also allows for greatly increased suspension adjustment at the housing. The included anti-roll bar allows the racer to preload the rear suspension for differing track conditions. Also included are adjustable coil over shock mounts.

THIS KIT WAS DESIGNED FOR DRAG RACING ONLY!

**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!

Package will typically ship within in 5-7 Business days of completed order!

Add To Cart
Designed for the 1968-72 A-Body Platform

$4,170.00

M9SUPERAPKG

Moser Engineering introduces the latest addition to our Super Package line of battle tested rears. This one kit now offers a solution for serious and dedicated racers running 68-72 A-Body cars like the Chevelle, Malibu, Cutlass, GTO, Grand Prix & Monte Carlo. This package gives the adjustability and confidence to take their car to the limit of a stock chassis without completely gutting the car for a custom race or tube chassis.

Package will typically ship within in 5-7 Business days of completed order!

THIS KIT WAS DESIGNED FOR DRAG RACING ONLY!

**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!

Add To Cart
The Moser Engineering 5TH GEN Rear Sub Frame Kit! (Fab M9 Pictured)

$7,921.00

12BGEN5

The New Moser Engineering "Gen V" Rear Sub Frame Kit!
Fits:
2008 - 2009 Pontiac G8
2010 - 15 Chevrolet Camaro
*Kit ships within 3 weeks of online order completion!

PRODUCT DESCRIPTION:
The Moser Engineering rear sub frame kit for the 2010 -15 Camaro was primarily designed for NHRA Stock Eliminator classes but can be adapted for other applications.

*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE & CRADLE IS REQUIRED!

Add To Cart

$6,723.00

M9HP11

The New Solid Axle Package is designed to replace the independent
rear end assembly in the Dodge Challenger. This package is based on
the highly successful Moser M9 Fabricated housing and gives you
everything you need to build serious power without breaking like the
OEM rear. This unit still gives you a rear that can handle street driving
and the reliability to go well beyond the limitations of even the best
independent rear end upgrades. Reliability and tunability for the serious
racers that are building serious power.

Features:
•  M9 Fabricated Moser Housing w/Back Brace
•  Moser Custom Race Axles
•  Moser Subframe Assembly
•  Anti-Roll Assembly
•  Torque Arm
•  Track Locators
•  Lower Control Arms
•  Subframe Connector w/Torque Arm Connector
•  Optional Thru Bolt Aluminum Moser Center Section
•  Optional Shocks/Springs


*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE IS REQUIRED!

Add To Cart
M9 Fabricated Gen 5 Camaro Rear Solid Axle Sub Frame Kit!

$6,723.00

M9GEN5

PRODUCT DESCRIPTION
The Moser Engineering rear sub frame kit for the 2010-15 Newer Camaro & 2008 & 2009 Pontiac G8!

Convert your street car into a COPO clone for a lot less money!
Fits:
2008 - 2009 Pontiac G8
2010, 2011, 2012, 2013, 2014 & 2015 Chevrolet Camaro
*Kit ships within 3 weeks of online order completion!

The standard kit includes the following;
M9 Fabricated Mild-Steel 9" Housing (includes Back Brace)
Moser Alloy Axles
5/8" Drive Stud Kit (2" or 3")
Sealed Axle Bearings
Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts and Spring Mounts.
All Associated Hardware is supplied!

Additional Components required but not supplied in the standard M9 kit: CENTER SECTION (3RD MEMBER)
BRAKES
DRIVESHAFT
SHOCKS
REAR END FLUID

*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE & CRADLE IS REQUIRED!

Add To Cart
M9 Fabricated Gen 5 Camaro Rear Solid Axle Sub Frame Kit!

$5,130.00

M9HPGTO

2004-2006 M9 GTO (HOLDEN) Housing & Axle Package
Perfect Drag Racing Setup for 10 Second (1/4 mile) & faster cars
The Industries Strongest Torque Arm Assembly
Adjustable Intersect Points on Transmission Cross Member
Chrome-Moly Torque Arm
TIG Welded Torque Arm & Cross-Member for Superior Strength
Suspension items come Powder Coated

*FABRICATION/WELDING IS REQUIRED, See instructions before ordering!

MADE THE AMERICAN WAY IN THE USA!

Product will ship within 7-10 business days.

Add To Cart
The Moser Engineering C-5 Corvette Rear Sub Frame Kit!

$8,011.00

12BC5

Moser Engineering C-5 Corvette Rear Sub Frame Kit!

Fits: 1997-2004 Chevrolet Corvette
*Kit ships within 3 weeks of online order completion!
The standard kit includes the following;
New Moser 12-Bolt Housing
35 Spline Custom Alloy Axles
Moser Lightweight Steel Spool
12-Bolt Pro/Comp Ring & Pinion
1350 Series Chrome Moly Pinion Yoke
Timken Bearings
5/8" Drive Stud Kit (2" or 3")
Sealed Axle Bearings
Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
All Associated Hardware is supplied!

PRODUCT DESCRIPTION

The Moser Engineering rear sub frame kit in the C-5 Corvettes. This kit was primarily designed for NHRA Stock Eliminator classes but can be adapted for other uses. Since the C-5 Corvette is designed to be an independent rear with a transaxle, modifications must be made to the transmission tunnel, torque tube tunnel and upper rear control arm mounts to facilitate this installation. These modifications must be done in advance of the installation of this kit. The lower portion of the rear frame rails directly above the rear end housing may need to be C notched for adequate clearance. The stock fuel tanks, lines, etc.... need to be removed as well.

Add To Cart
Moser 40 Spline Full-Float Axles

$671.00

A40CST-FF

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed. (unless Gun-Drilled at which point it will ship in three business day)
This part number represents 1 pair (2) axles only.
Order Instructions

Add To Cart
MOSER M9 SHOWN WITH 7290KM BRACKETS

$4,316.00

7H9FDRMFL

The Floater Rear End is becoming a necessity for today's big MPH cars. NHRA mandates that vehicles traveling faster than 6.50 or 210 MPH in the 1/4 mile are required to run a "Floater or Live Axle" Rear End.

This Custom Fabricated Item will ship 3-5 days after order completion, if ordered with the powder coating option product will ship in 5-7 days.

Add To Cart