TYPE OF REAR END *

-- Please Select --10 Bolt Chevy 12 Bolt Chevy 8.8" Ford

LIST VEHICLE MAKE AND MODEL FOR AN UNALTERED OEM REAR END

Maximum number of characters: 24

TYPE OF HOUSING END (Measure Bolt Pattern Carefully)  *

-- Please Select --10/12 bolt Bolt Chevy 8.8" Ford Large GM (Impala/Truck)

SPLINE COUNT *

-- Please Select --28 Spline 30 Spline 31 Spline 33 Spline 35 Spline

DRIVER SIDE "C" (FACE OF AXLE FLANGE TO END OF SPLINE)

Maximum number of characters: 12

PASSENGER SIDE "C" (FACE OF AXLE FLANGE TO END OF SPLINE)

Maximum number of characters: 12

HUB PILOT ("A")

Maximum number of characters: 12

BOLT CIRCLE  *

-- Please Select --5 X 4 1/2" (FORD, MOPAR) 5 X 4 3/4" (CHEVY) 5 X 5" (CHEVY, FORD) 5 X 5 1/2" (FORD) 6 X 5 1/2" (CHEVY) 4 X 4 1/4" (FORD) 5 X 4" (MOPAR) 5 X 135MM (FORD) 4 X 4 1/2"

STUD TYPE *

-- Please Select --1/2" X 20 X 2" (SCREW-IN) #8002 1/2" X 20 X 3" (SCREW-IN) #8000 5/8" X 18 X 2" (SCREW-IN) # 8080S +$45.005/8" X 18 X 3" (SCREW-IN) # 8080 +$45.001/2" X 20 X 3" (.625" KNURL) # 8010 1/2" X 20 X 3" (.685" KNURL) # 8020 7/16" X 20 2 7/8" (.480" KNURL) # 8050 1/2" X 20 X 1 1/2" (.625" KNURL) # 8030 1/2" X 20 X 1 3/4" (.625" KNURL) # 8368 1/2" X 20 X 1 1/2" (.665" KNURL) # 8040 7/16" X 20 X 1 1/4" (.480" KNURL) # 8060 7/16" X 20 X 1 3/4" (.480" KNURL) # 8259 12mm x 2 1/2" (.505" KNURL) # 8255 12mm x 1 1/2" (.505" knurl) # 8254

AXLE FLANGE DIAMETER ("J")  *

Maximum number of characters: 12

TYPE OF BRAKES/MANUFACTURES PART NUMBER  *

Maximum number of characters: 24

AXLE FLANGE TO AXLE FLANGE ("D")

Maximum number of characters: 12

HOUSING END TO HOUSING END ("E")

Maximum number of characters: 12

DRIVER SIDE HOUSING END TO PINION CENTER ("F") (DO NOT measure through the tubes)

Maximum number of characters: 12

PASSENGER SIDE HOUSING END TO PINION CENTER ("G") (DO NOT measure through the tubes)

Maximum number of characters: 12

SERVICE/LIGHTENING OPTIONS

• ACCESS HOLES +$20.00
• GUN DRILLING (33 & 35 Spline Only) (*Adds additional Day to Manufacturing process) +$100.00
• STAR FLANGING (*Adds additional Day to Manufacturing process) +$50.00
• LIGHTENING HOLES (*Adds additional Day to Manufacturing process) +$40.00

* Required Fields