3MSC31BN325

NEW UNIT - CANCELED ORDER!!! 9" CENTER SECTION - ONLY 1 AVAILABLE AT THIS PRICE!
COMPLETE 9" INCLUDES:
3.062" Moser Stock Nodular Iron Case
31 Spline Trac-Loc LSD
1310 Series Chrome Moly Pinion Yoke
Nodular Iron Daytona Pinion Support
3.25:1 Ratio Street/Strip Ring & Pinion (8620 Material)
**CASE & PINION SUPPORT POWDER COATED SEMI-GLOSS BLACK**
Black Plastic Case
UNIT SOLD AS IT IS ASSEMBLED!
NO CHANGES CAN BE MADE, THIS UNIT IS READY TO SHIP SAME DAY IF ORDERED BEFORE 2:00PM EST!

3MNT31AN350

NEW UNIT - CANCELED ORDER!!! 9" CENTER SECTION - ONLY 1 AVAILABLE AT THIS PRICE!
COMPLETE 9" INCLUDES:
3.062" Moser Performance Nodular Iron Case
31 Spline Truetrac
1350 Series Chrome Moly Pinion Yoke
Nodular Iron Daytona Pinion Support
3.70:1 Ratio Street/Strip Ring & Pinion (8620 Material)
Painted Charcoal Grey
Black Plastic Case
UNIT SOLD AS IT IS ASSEMBLED!
NO CHANGES CAN BE MADE, THIS UNIT IS READY TO SHIP SAME DAY IF ORDERED BEFORE 2:00PM EST!

3MNT31AA370

NEW UNIT - CANCELED ORDER!!! 9" CENTER SECTION - ONLY 1 AVAILABLE AT THIS PRICE!
COMPLETE 9" INCLUDES:
3.062" Moser Performance Nodular Iron Case
31 Spline Truetrac
1350 Series Chrome Moly Pinion Yoke
Aluminum Daytona Pinion Support
3.70:1 Ratio Street/Strip Ring & Pinion (8620 Material)
Black Plastic Case
UNIT SOLD AS IT IS ASSEMBLED!
NO CHANGES CAN BE MADE, THIS UNIT IS READY TO SHIP SAME DAY IF ORDERED BEFORE 2:00PM EST!

3MNS31AN411

NEW UNIT - CANCELED ORDER!!! 9" CENTER SECTION - ONLY 1 AVAILABLE AT THIS PRICE!

COMPLETE 9" INCLUDES:
3.062" Moser Performance Nodular Iron Case
31 Spline Steel Spool
1350 Series Chrome MolyPinion Yoke
Nodular Iron Daytona 5-Hole Pinion Support
4.11:1 Ratio P/S Ring & Pinion (8620 Material)
Black Plastic Case
UNIT SOLD AS IT IS ASSEMBLED!
NO CHANGES CAN BE MADE, THIS UNIT IS READY TO SHIP SAME DAY IF ORDERED BEFORE 2:00PM EST!

3MAS35AP429P

NEW UNIT - CANCELED ORDER!!! 9" CENTER SECTION - ONLY 1 AVAILABLE AT THIS PRICE!

Part # 3MAS35AP429P

COMPLETE 9" CENTER SECTION INCLUDES:
3.250" Moser Thru-Bolt Aluminum Case
35 Spline Steel Spool
1350 Series Chrome MolyPinion Yoke
Aluminum 5-Hole PRO Pinion Support
4.29:1 Ratio 9" PRO/COMP Ring & Pinion (9310 Material)
Black Plastic Case

FOR DRAG RACING APPLICATIONS ONLY!!!
UNIT SOLD AS IT IS ASSEMBLED!
NO CHANGES CAN BE MADE, THIS UNIT IS READY TO SHIP SAME DAY IF ORDERED BEFORE 2:00PM EST!

5TT586

***OVERSTOCK ITEM SALE PRICE $495!***

***FREE GROUND SHIPPING***

SAME DAY SHIPPING (if ordered before 2pm EST)

M9GEN5-COMPLETE

***NEW UNIT CANCELED ORDER!***

The New Moser Engineering "Gen V" Rear Sub Frame Kit!
Convert your street car into a COPO clone for a lot less money!
Fits: 2010 - 15 Chevrolet Camaro
*Kit ships same day if ordered before 1:00pm
The standard kit includes the following;
M9 Fabricated Mild-Steel 9" Housing 61 1/2" Wide (67" Wheel to Wheel)
Moser 35 Spline Alloy Axles
1/2"-20 X 2" Screw-In Studs
Sealed Axle Bearings
Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
All Associated Hardware is supplied!
Aluminum 3.250" Thru-Bolt Case
35 Spline Eaton Truetrac Limited Slip Posi
1350 Series Chroem Moly Pinion Yoke
3.25:1 Ratio US Gear
Wilwood Low-Profile Disc Brake Kit w/Drilled Rotors (140-11389-D)
Stainless Steel Flex Line Hose Kit
Lokar Emergency Brake Cables
JRi - Double Adjustable Coil-Over Shocks
200 lbs. Chrome Springs
Housing and Sub-Frame Assembly are Powder Coated Semi-Gloss Black!
Center section is set-up, but will need installed in housing, brakes are shipped in a boxed kit, this unit is not a MusclePak, ASSEMBLY REQUIRED!!!

PRODUCT DESCRIPTION
The Moser Engineering rear sub frame kit for the 2010 & Newer Camaro!
The installation of this kit requires Fabrication/Welding skills and should not be attempted by a novice!
***You cannot use the OEM fuel tank, an aftermarket Fuel Cell is required!