2009-Newer Challenger M9 Rear Solid Axle Sub Frame Kit!
The New Solid Axle Package is designed to replace the independent
rear end assembly in the Dodge Challenger. This package is based on
the highly successful Moser M9 Fabricated housing and gives you
everything you need to build serious power without breaking like the
OEM rear. This unit still gives you a rear that can handle street driving
and the reliability to go well beyond the limitations of even the best
independent rear end upgrades. Reliability and tunability for the serious
racers that are building serious power.
Features:
• M9 Fabricated Moser Housing w/Back Brace
• Moser Custom Race Axles
• Moser Subframe Assembly
• Anti-Roll Assembly
• Torque Arm
• Track Locators
• Lower Control Arms
• Subframe Connector w/Torque Arm Connector
• Optional Thru Bolt Aluminum Moser Center Section
• Optional Shocks/Springs
*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE IS REQUIRED!
***AFTERMARKET BRAKES REQUIRED!
***MUST PROVIDE A WHEEL MOUNTING SURFACE TO WHEEL MOUNTING SURFACE MEASUREMENT!
$6,945.00
*The Moser Engineering "Challenger" Rear Sub Frame Kit!
Fits:
2009 - 2010 - 2011 - 2012 - 2013 - 2014 - 2015 - 2016 - 2017 - 2018 - 2019 Challenger
*Kit ships within 3 weeks of online order completion!
The standard kit includes the following:
- M9 Fabricated Mild-Steel 9" Housing (Includes Back Brace)
- Moser Alloy Axles
- 1/2" Wheel studs
- Sealed Axle Bearings
- Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
- Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
- All Associated Hardware is supplied!
Additional Components required but not supplied in the standard M9 kit:
- CENTER SECTION (3RD MEMBER)
- BRAKES
- DRIVESHAFT
- SHOCKS
- REAR END FLUID
*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE IS REQUIRED!
***AFTERMARKET BRAKES REQUIRED!
***MUST PROVIDE A WHEEL MOUNTING SURFACE TO WHEEL MOUNTING SURFACE MEASUREMENT!
Additional information
| Weight | 500 lbs |
|---|---|
| Dimensions | 69 × 60 × 37 in |
Related Products
-
Sale!
1982-1992 F-Body (Camaro / Firebird) – 9″ Ford Housing & Axles
Original price was: $1,650.00.$1,269.00Current price is: $1,269.00. -
Sale!
Fox Body Mustang- 9″ Ford Housing & Axles Package
Original price was: $1,600.00.$1,400.00Current price is: $1,400.00. -
Sale!
1993-02 F-Body (Camaro / Firebird) – 9″ Ford Housing & Axles
Original price was: $1,650.00.$1,269.00Current price is: $1,269.00.