TYPE OF REAR END *

• 9" Ford
• Dana 60
• 8 3/4" Chrysler
• 10 Bolt Chevy
• 12 Bolt Chevy
• 8.8" Ford
• 9" Ford (HOBBY STOCK AXLES) *REQUIRES SPECIAL DEEP BORE HOUSING ENDS +$85.00
• Dana 60 (HOBBY STOCK AXLES) *REQUIRES SPECIAL DEEP BORE HOUSING ENDS +$85.00

LIST VEHICLE MAKE AND MODEL FOR AN UNALTERED OEM REAR END

Maximum number of characters: 24

TYPE OF HOUSING END (Measure Bolt Pattern Carefully)  *

• Big Ford
• Big Ford - New Style (Torino)
• Small Ford
• OLDS/Pontiac
• 10/12 bolt Bolt Chevy (Aftermarket)
• Lamb/Symmetrical
• 8.8" Ford (Aftermarket)
• Large GM (Impala/Truck) (Aftermarket)
• 8 3/4" MOPAR/Dana 60

SPLINE COUNT *

• 28 Spline
• 30 Spline
• 31 Spline
• 33 Spline
• 35 Spline

DRIVER SIDE "C" (FACE OF AXLE FLANGE TO END OF SPLINE)

Maximum number of characters: 12

DRIVER SIDE "K" (BEARING SEAT TO AXLE SPLINE END)

Maximum number of characters: 12

PASSENGER SIDE "C" (FACE OF AXLE FLANGE TO END OF SPLINE)

Maximum number of characters: 12

DRIVER SIDE "K" (BEARING SEAT TO AXLE SPLINE END)

Maximum number of characters: 12

HUB PILOT ("A")

Maximum number of characters: 12

BOLT CIRCLE  *

• 5 X 4 1/2" (FORD, MOPAR)
• 5 X 4 3/4" (CHEVY)
• 5 X 5" (CHEVY, FORD)
• 5 X 5 1/2" (FORD)
• 6 X 5 1/2" (CHEVY)
• 4 X 4 1/4" (FORD)
• 5 X 4" (MOPAR)
• 5 X 135MM (FORD)
• 4 X 4 1/2"

STUD TYPE *

• 1/2" X 20 X 2" (SCREW-IN) #8002
• 1/2" X 20 X 3" (SCREW-IN) #8000
• 5/8" X 18 X 2" (SCREW-IN) # 8080S +$45.00
• 5/8" X 18 X 3" (SCREW-IN) # 8080 +$45.00
• 1/2" X 20 X 3" (.625" KNURL) # 8010
• 1/2" X 20 X 3" (.685" KNURL) # 8020
• 7/16" X 20 2 7/8" (.480" KNURL) # 8050
• 1/2" X 20 X 1 1/2" (.625" KNURL) # 8030
• 1/2" X 20 X 1 3/4" (.625" KNURL) # 8368
• 1/2" X 20 X 1 1/2" (.665" KNURL) # 8040
• 7/16" X 20 X 1 1/4" (.480" KNURL) # 8060
• 7/16" X 20 X 1 3/4" (.480" KNURL) # 8259
• 12mm x 2 1/2" (.505" KNURL) # 8255
• 12mm x 1 1/2" (.505" knurl) # 8254
• 5/8"-11 x 2 1/2" (Quick Start end) .685" knurl +$5.00
• 5/8"-18 x 2 1/2" (Quick Start end) .685" knurl +$10.00

2ND BOLT CIRCLE (IF NECESSARY)

• None
• 5 X 4 1/2" (FORD, MOPAR) +$25.00
• 5 X 4 3/4" (CHEVY) +$25.00
• 5 X 5" (CHEVY, FORD) +$25.00
• 5 X 5 1/2" (FORD) +$25.00
• 6 X 5 1/2" (CHEVY) +$25.00
• 4 X 4 1/4" (FORD) +$25.00
• 5 X 4" (MOPAR) +$25.00
• 5 X 135MM (FORD) +$25.00
• 4 X 4 1/2" +$25.00

AXLE FLANGE DIAMETER ("J")  *

Maximum number of characters: 12

AXLE FLANGE TO BEARING SEAT DIMENSION ("B") (measured with bearing removed) *

Maximum number of characters: 12

BEARING TYPE *

• SEALED BALL BEARING
• TAPERED ROLLER BEARING +$20.00

TYPE OF BRAKES/MANUFACTURES PART NUMBER  *

Maximum number of characters: 24

AXLE FLANGE TO AXLE FLANGE ("D")

Maximum number of characters: 12

HOUSING END TO HOUSING END ("E")

Maximum number of characters: 12

DRIVER SIDE HOUSING END TO PINION CENTER ("F") (DO NOT measure through the tubes)

Maximum number of characters: 12

PASSENGER SIDE HOUSING END TO PINION CENTER ("G") (DO NOT measure through the tubes)

Maximum number of characters: 12

SERVICE/LIGHTENING OPTIONS

• ACCESS HOLES +$20.00
• GUN-DRILLING (33 & 35 SPLINE ONLY) +$100.00
• STAR FLANING +$50.00
• LIGHTENING HOLES +$40.00

* Required Fields