12-Bolt 2010-2015 Camaro (5th Gen) & 2008-2009 Pontiac G8 Complete Rear Sub Frame Kit

  • The Moser Engineering 5TH GEN Rear Sub Frame Kit! (Fab M9 Pictured)
  • Moser Performance Rear Drag Brake Kit (Optional)
  • COPO_Camaro.jpg
  • 2008-pontiac-g8-photo-173024-s-986x603.jpg

12BGEN5

******While we pride ourselves on providing the fastest production times in our industry, due to an unprecedented increase in order volume combined with part availability issues from our suppliers we can not, at this time, guarantee the processing time of your order. Please know that your order will be give the attention it deserves and will be shipped as soon as possible based on part availability.

THE STRONGER REAR-END REPLACEMENT!

The New Moser Engineering "Gen V" Rear Sub Frame Kit!
Fits:
2008 - 2009 Pontiac G8
2010 - 15 Chevrolet Camaro
*Kit ships within 3 weeks of online order completion!

PRODUCT DESCRIPTION:
The Moser Engineering rear sub frame kit for the 2010 -15 Camaro was primarily designed for NHRA Stock Eliminator classes but can be adapted for other applications.

*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE & CRADLE IS REQUIRED!

$7,330.00

The New Moser Engineering "Gen V" Rear Sub Frame Kit!

Fits:
     2008 - 2009 Pontiac G8
     2010 2011 2012 2013 2014 2015 Chevrolet Camaro

*Kit ships within 3 weeks of online order completion!
The standard kit includes the following;
  • New Moser 12 Bolt Housing
  • 35 Spline Custom Alloy Axles Come Standard
  • Moser Lightweight Steel Spool
  • Bolt Pro/Comp Ring & Pinion
  • 1350 Series Chrome Moly Pinion Yoke
  • Timken Bearings
  • 5/8" Drive Stud Kit (2" or 3")
  • Sealed Axle Bearings
  • Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Sub Frame Kit
  • Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
All Associated Hardware is supplied!

PRODUCT DESCRIPTION
The Moser Engineering rear sub frame kit for the 2008 -2009 Pontiac G8 & 2010 -15 Camaro was primarily designed for NHRA Stock Eliminator classes but can be adapted for other applications.

*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!

**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!


***REMOVAL OF THE SPARE TIRE & CRADLE IS REQUIRED!